BVYSZ - 5 AEROSOL, TT-I-735

  • MSDS: BVYSZ
  • Manufacturer: PRO LINE PAINT CO
  • Product Name: 5 AEROSOL, TT-I-735
  • National Stock Number: 6810-00N054802
Product Identification

Product ID:5 AEROSOL, TT-I-735
MSDS Date:06/04/1992
FSC:6810
NIIN:00N054802
MSDS Number: BVYSZ

Responsible Party
PRO-LINE PAINT CO
2646 MAIN ST
SAN DIEGO, CA 92113-3697
US

Emergency Phone: 619-725-3192

Info Phone: 619-231-2313

Cage: 9D157

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 100%

OSHA PEL 400 PPM; 500 STEL

ACGIH TLV: 400 PPM; 500 STEL


790 G/L

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NAUS, DIZZ, HEADACHE &
CONVULSIONS. INHAL: HIGH CONCS CAN CAUSE NARCOSIS. SKIN/EYES:
BURNING SENSATION FROM VAPOR/LIQUID. DERMATITIS, SENSITIZATION,
IRRITATION. ABSORPTION THRU SKIN CAUSES DEFA TTING. INGEST: TOXIC
IF SWALLOWED. CAN CAUSE BURNING SENSATION, VOMITING, DIARRHEA,
DROWSINESS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: REPORTS HAVE SHOWN THAT ASSOCIATED
REPEATED AND PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS MAY
CAUSE PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE
BY DELIBERATELY CONCEN TRATING AND INHALING THE CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ASTHMA & SKIN ALLERGIES.

First Aid

First Aid:EYES: FLUSH IMMED W/FRESH WATER BY AN EYE WASH APPARATUS OR
BY HAND FOR AT LEAST 15 MIN. SEEK MED ATTN. SKIN: WASH IMMED
W/WATER. THEN WASH W/SOAP & WATER. RINSE IMMED. SEEK MED ATTN.
INHAL: MOVE PERS ON TO FRESH AIR; ARTF RESP IF NEC. SEEKMED ATTN.
INGEST: SEEK MED ATTN. RECOM TO MD: IN ACUTE CASES SEEK MED ATTN
IMMED. FOR WORKERS WHO MAY BE EXPOSED REGULARLY, PROVIDE DETAILED
PERIODIC EXAMS.

Fire Fighting

Flash Point Method:TCC
Flash Point:53.0F,11.7C
Lower Limits:2%
Upper Limits:12.7%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
BLANKET FLAME W/ONE OF EXTING MEDIA. VAPS OF COMBUST MAY BE IRRIT
TO RESP TRACT. MAY CAUSE BRTHG (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS AND
OPEN FLAMES.

Accidental Release

Spill Release Procedures:REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEAN-UP PERSON WITH 8540 3M
RESPIRATOR (NIOSH/MSHA APPROVED) & GOGGLES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DMG TO CNTNRS
& SPILLAGE. STORE IN A COOL, WELL VENT AREA W/SPRINKLER SYSTEM.
KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. ODOR IS NOT AN
ADEQUATE WARNING OF INTOXICATION.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE ORG VAP
CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS MAY BE EXCEEDED, E.G.
8430 3M CORP RESP (NIOSH/MSHA APPRVD). WHEN USING IN (SUPDAT)
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAMD CLTHG IMMED.
PROVIDE EMER SHOWERS & EYEWASH AT STATIONARY PAINT APPLICATION
FACILITIES.
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health
FIRE FIGHT PROC: DIFFICULTY. PREVENT HUMAN EXPOSURE TO FIRE, SMOKE,
FUMES, ETC. HAZ DECOMP PRODS: CARBON MONOXIDE. RESP PROT: CONFINED
AREA, USE AIR-FED HOOD.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:181F,83C
Vapor Pres:32.8 @ 20C
Vapor Density:2.07
Spec Gravity:0.79 (H2O=1)
Evaporation Rate & Reference:1.7 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID WITH MEDICINAL ALCOHOLIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE VIGOROUS REACTION.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPORS TO ACCUMULATE.
Hazardous Decomposition Products:FLAM FUMES MAY ACCUM IN CONFINED AREA
& SPARKS/OPEN FLAMES MAY IGNITE IT. MAY LIBERATE CARBON DIOXIDE &
POSS (SUPDAT)

Disposal

Waste Disposal Methods:USE METAL CONTAINER MARKED "DO NOT REUSE." PUT
THE MATERIAL IN THIS CONTAINER. USE VERMICULITE OR OTHER INERT
ABSORBENT. KEEP AWAY FROM SEWER. DISPOSE OF ALL WASTES IN
ACCORDANCE WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.